Compartir
Título
Validation of a inertial movement unit with a linear encoder to evaluate strength and power
Autor
Facultad/Centro
Área de conocimiento
Título de la revista
European Journal of Human Movement
Cita Bibliográfica
Fernández Llopez, R., Benito Trigueros, A. M. d., Cosme Llópez, E., & Pablos Abella, C. (2019). Validation of a inertial movement unit with a linear encoder to evaluate strength and power. European Journal of Human Movement, 43, 40-48.
Editorial
Asociación Española de Ciencias del Deporte
Fecha
2019
Resumen
[EN] The object of this study was to find out the evaluation and reliability of an inertial movement unit (IMU), based on the TITAN (rO2 Sport Technology and Consulting, Valencia, Spain) system, measuring the variables of sports performance. A linear encoder T-Force (Ergotech System, Murcia, Spain) was used to compare data obtained. 10 voluntary subjects with previous experience of strength training in the study participated. They carried out a total of 200 times bench press in concentric phase, 50% and 70% of individual body weight. The variables analyzed were: maximum speed, maximum acceleration, maximum strength and maximum power peak. Models of linear regression with an independent variable (T-Force data) and a dependant variable (TITAN data) were applied. The assumed independence of error was contrasted by way of a Durban-Watson trial. Partial self correlations were calculated with a significant level p≤0.05. The existence of interclass correlations between the averages of both apparatus,ranging between 0.95 and 0.99 was conformed. In conclusion, the TITAN system could be a valid system to measure maximum velocity, maximum acceleration, maximum strength and maximum power peak during the bench press trial. Therefore, this system based on IMU, could be a valuable tool for the evaluation of strength and power training in the execution of this movement. [ES] El objetivo de este estudio fue descubrir la evaluación y la confiabilidad de una unidad de movimiento inercial (IMU), basada en el sistema TITAN (rO2 Sport Technology and Consulting, Valencia, España), que mide las variables del rendimiento deportivo. Se utilizó un codificador lineal T-Force (Sistema Ergotech, Murcia, España) para comparar los datos obtenidos. Participaron 10 sujetos voluntarios con experiencia previa en entrenamiento de fuerza en el estudio. Realizaron un total de 200 veces press de banca en fase concéntrica, 50% y 70% del peso corporal individual. Las variables analizadas fueron: velocidad máxima, aceleración máxima, fuerza máxima y pico de potencia máxima. Se aplicaron modelos de regresión lineal con una variable independiente (datos de T-Force) y una variable dependiente (datos de TITAN). La supuesta independencia del error fue contrastada mediante un juicio de Durban-Watson. Las autocorrelaciones parciales se calcularon con un nivel significativo p≤0.05. Se confirmó la existencia de correlaciones entre clases entre los promedios de ambos aparatos, que oscilaban entre 0,95 y 0,99. En conclusión, el sistema TITAN podría ser un sistema válido para medir la velocidad máxima, la aceleración máxima, la fuerza máxima y el pico de potencia máxima durante la prueba de press de banca. Por lo tanto, este sistema basado en IMU, podría ser una herramienta valiosa para la evaluación del entrenamiento de fuerza y potencia en la ejecución de este movimiento.
Materia
Palabras clave
Peer review
SI
URI
Versión del editor
Aparece en las colecciones
- Artículos [4641]
Ficheros en el ítem
Tamaño:
505.8
xmlui.dri2xhtml.METS-1.0.size-kilobytes
Formato:
Adobe PDF