Compartir
Título
Proyecto para las instalaciones de electricidad, fontanería, calefacción, A.C.S. y ventilación de un garaje de un edificio
Autor
Director/es
Facultad/Centro
Área de conocimiento
Titulación
- Grado en Ingeniería Mecánica
Cita Bibliográfica
Carracedo Santos, B. (2022). Proyecto para las instalaciones de electricidad, fontanería, calefacción, A.C.S. y ventilación de un garaje de un edificio. [Trabajo de fin de Grado, Universidad de León]
Fecha
2022-07
Resumen
[ES] Se ha realizado el proyecto de las instalaciones de electricidad, fontanería, calefacción, A.C.S. y ventilación del garaje de la planta sótano. Se ha obtenido un presupuesto final con las mediciones correspondientes a estos apartados igual a 96.354,32 €. Dentro del apartado de la memoria se recoge las justificaciones adoptadas para los cálculos de dichas instalaciones con sus normativas correspondientes a cada instalación. Los cálculos realizados y obtenidos de los programas se introducirán dentro de los anexos, separados correctamente por el tipo de instalación. Por último, en el apartado de planos se ha introducido un primer plano exponiendo la ubicación del edificio y a continuación un listado de los planos correspondientes a cada instalación planta por planta. Como apoyo al A.C.S se ha optado por utilizar la aerotermia, ya que no tiene prácticamente repercusión medio ambiental y tampoco crea contaminación acústica. En los planos de fontanería se puede ver la instalación sin el apoyo de aerotermia y con el apoyo de esta. [EN] The project in question consists of the electricity, plumbing, heating, D.H.W. and ventilation installations for the basement, which is a garage of a building consisting of 14 dwellings. For this, the Procuno program has been used to calculate the plumbing, heating, D.H.W. and ventilation, highlighting in the latter that only one fan will be needed to extract the air. On the other hand, for the calculation of the electricity installation, they have been carried out manually and the arrangement of the different components has been done with the AutoCAD program. The total budget we have obtained is €96,354.32. In support of the D.H.W. aerothermal energy has been used since it can be used both in winter and summer and has no environmental impact, it is a renewable energy and it is the most efficient. Within the basic health and safety study document, it has been developed focusing above all on the installations that we are going to carry out in the building and not on the construction of the building itself. In conclusion, we will highlight that this project is very complete at the level of facilities since we cover all the facilities of a building and we incorporate additional support for the D.H.W.
Materia
Palabras clave
URI
Aparece en las colecciones
Ficheros en el ítem
Nombre:
Tamaño:
15.24
xmlui.dri2xhtml.METS-1.0.size-megabytes
Formato:
Adobe PDF
Descripción:
Trabajo de Fin de Grado